Valves
and Actuators
Techmark offers a full line of modulating actuators and valves,
for heating, cooling, live steam injection and damper motors.
Techmark can properly size and replace your existing system
to ensure optimal performance and to reduce energy cost by eliminating
oversized valves and faulty valve seating. |
|
 |
return to top
|
|
|
Quonset
Houses
Techmark has designed Quonset houses for specialty and white
button mushrooms. The structures are made of galvanized square
tubing that are structurally designed for wind and snow loads.
Each house consists of a double layer of reinforced plastic
fabrics covers with insulation in between the layers and metallic
snap clamps for securing the fabric covers. Multiple Quonset
houses can be connected together via a head house for product
handling and storage. |
|
 |
return to top
|
|
|
TL-8
Growing Room Lights
Today's growing environment creates a high setting for failure
of fluorescent lights. Techmark TL-8 lights are designed for
the wash down environment in growing rooms and processing systems.
The TL-8 design is based on safety, simple installation and
easy maintenance. The TL-8 consists of an 8' fluorescent light
with electronic ballast built in to an acrylic or polycarbonate
tube. All electrical components are UL and CSA listed. Several
different type of ballasts and lamps are available for your
specific application. Each light can be mounted on the wall
or ceiling with our snap clamps or hung from a tray with our
stainless steel hook. |
|
 |
return to top
|
|
|
Alarm
Systems
Alarm systems help prevent loss of product...and profit. The
Sensaphone® phone dialer monitors temperature, electricity
and smoke conditions via smoke alarm. If an alarm occurs, managers
are contacted at up to eight telephone or pager numbers. Fancom
FB series alarm systems have the ability for 1 to 16 input units,
sirens, strobe lights and more. |
|
  |
return to top
|
|
|
Sensor
Hardware
Techmark uses RTD temperature sensors for monitoring air and
compost temperatures. Wet/dry bulb relative humidity sensors
are used where accurate high-RH measurements are needed. Carbon
dioxide is measured with sensitive NDIR technology. Oxygen is
also monitored and controlled with our MUX multiplexing systems.
|
|
 |
